E-SERIES
(May, 2004)
40
STATEMENTSOFCONFORMITY
219 See combined statements under “212/219” for all
vehicle types.
220 The statementsbelow are applicable to theCutaway
equipped with the School Bus Prep Package when
completedasaschool bus:
TheCutaway body structure asmanufactured by Ford,
doesnotmeet thestrength requirementsofFMVSS220,
School BusRolloverProtection;accordinglyFordMotor
Companymakes no representation as to conformity of
the completed vehiclewith thisStandard.
221 The statementsbelow are applicable to theCutaway
equipped with School Bus Prep Package when
completedasaschool bus:
This vehiclewhen completed, will conform toStandard
221, School BusBody Joint Strength, if:
• No alterations or modifications are made to the
body panel joints as manufactured by Ford Motor
Company from the forwardmostpointof thewindshield
rearward.
• The passenger first row seating reference point is
located 762.0 mm [30.00 inch] or more, rearward of
the back of theCutaway body.
Anyadditionalmaintenancepanelsor bodypanel joints
that are added to this vehicle must comply with the
requirements of this regulation.
222 The statement below is applicable to the Cutaway
equipped with the School Bus Prep Package when
completedasaschool bus:
Conformity with Standard 222, School Bus Passenger
SeatingandCrashProtection, isnotsubstantiallyaffected
by the design of this incomplete vehicle; accordingly
Ford Motor Company makes no representation as to
conformitywith thisStandard.
225 The statement below is applicable to all incomplete
vehicle typesexceptBasic (Stripped)Chassis:
This vehicle, when completed, will conform toStandard
225, ChildRestraint AnchorageSystems, if:
• No alterations aremade to the front passenger seat
tether anchorages and access to the anchorages is
not restricted, andnoalterationsaremade to theseat
assemblies, their anchorages, the floor pan, or floor
pan reinforcements, and no seats are added.
Because theadditionof seatswouldchangecompliance
with this Standard, Ford Motor Company makes no
representations as to conformity with this Standard for
anyvehicle thathasseatsaddedby IntermediateorFinal
StageManufacturers.
225 The statement below is applicable to the following
incompletevehicle type:
• E-SeriesBasic (Stripped) Chassis
Conformity with Standard 225, Child Restraint
Anchorage Systems, is not substantially affected by
the design of this incomplete vehicle; accordingly,
Ford Motor Company makes no representations as to
conformitywith thisStandard.
