E-SERIES
(May, 2004)
25
STATEMENTSOFCONFORMITY
207 Thestatementsbelowareapplicable to the following
incomplete vehicle types when equipped with
untrimmed front seats:
• IncompleteE-SeriesVan
• Cutaway
This vehiclewhen completed, will conform toStandard
207, SeatingSystems, if:
• No changes or modifications are made to the front
seat frames, latches, hardware, and padding.
• The weight of each completely trimmed front seat
does not exceed the value inTableH on this page.
• Nomodificationsaremade to thefloorpan in thearea
of the front seat attachments.
• The front seat and seat belt anchorages are not
relocated.
If the front seat attaching hardware is removed for any
reason, it must be reinstalled to the specifications in
FigureB for E-Series on page 31.
Anyseatingsystemsadded to thisvehiclemust conform
to theapplicable requirements of thisStandard.
The Incomplete E-Series Recreational Van may have
additional anchorages for rear seatsother than the front
driver and passenger seats. These locations apply to
specific hardware and designated seating positions
used in Ford completed vehicles. If these anchorages
are used without the appropriate Ford seats, seat belt
systems, andhardware,FordMotorCompanymakesno
representation as to conformitywith thisStandard.
207 Thestatementsbelowareapplicable to the following
incompletevehicle typeswithno front seats:
• IncompleteE-SeriesVan
• Cutaway
• E-SeriesBasic (Stripped) Chassis
ConformitywithStandard 207, SeatingSystems, is not
substantially affected by the design of this incomplete
vehicle; accordingly, Ford Motor Company makes no
representationas to conformitywith thisStandard.
The Cutaway, when equipped with seat delete option,
will include both front seat pedestals, pretensioner
restraint systems, seat tracks, and a temporary driver’s
seat. The pretensioner restraint system is attached to
the seat track.Therefore, the completed seat assembly
must comply with the requirements of Standard 207
and 210.
The Incomplete E-Series Recreational Van may have
additional seat anchorages. These locations apply to
specific hardware and designated seating positions
used in Ford completed vehicles. If these anchorages
are used without the appropriate Ford seats, seat belt
systems, andhardware,FordMotorCompanymakesno
representationas to conformitywith thisStandard.
207
(Continued)
TABLEH
E-SERIESCOMPLETEDUNTRIMMEDSEATWEIGHT
MaximumWeight (lb)
Description
Driver-Side
Passenger-Side
E-SeriesCaptain’sChair –Manual Tracks
59.0
61.0
E-SeriesCaptain’sChair –Manual Tracks –Manual Lumbar
62.0
68.0
E-SeriesCaptain’sChair –PowerTracks –Manual Lumbar
68.0
N/A
