Operating Instructions
Vehicle
Page4-9
Crestline
Manual
3/15/2010
Coach
SafetyPrecautions
Useprovided seat belts at all times.
If thedual stretcher option is selected, theSquadbench is replacedwith aFlipbench. Whenusing a
secondary cot, always use the retaining strap to ensure that the bench stays flipped up against the
wall.
When theShoreline is activated, all 110-volt outlets are live.
Only load the storage compartmentswith amaximum of 30 lbs or 13.6kg.
DONOTSMOKE, strikeamatchor createSPARKSAROUNDABATTERY.
NEVERUSE OR PERMITOILORGREASE to contact oxygen cylinders, valves, regulators or
touch the samewhilewearing soiledgloves.
As the exhaust of a vehicle is the by-product of combustion, the exhaust is composed primarily of
Carbon Monoxide. Inhalation of this colourless and odourless gas should be avoided as Carbon
Monoxide can causeunconsciousness and ispotentially lethal.
If at any timeyou suspect that exhaust fumes are entering thepassenger or patient compartment,
have the causedetermined and correctedas soon aspossible. If youmust driveunder these
conditions, driveonlywith allwindows fullyopen.
KeylessRemoteModule
Thekeyless remotemodule is located in theupper right handcorner of theECC compartment.
There are3 sets ofwireswrappedup in a strapattached to themodule. Toprogramnewkey fobs,
un-wrap thesewires and apply12volts to the yellowwire3 times (on/off, on/off, on/off, on). While
maintaining12volts to the yellowwire, hold theblackmomentary switchon for 5 seconds. The
third set ofwires has a red light attached to it thatwill flashwhen this cycle is complete. Thekey
fobs arenow ready for programming. Press andhold the top left buttondownon thekey fob for
approximately3 seconds, or until you see the red light flash, andhear a click from themodule. The
remotekey fob isnowprogrammed. Re-bundle thewireswith the strap andplace thembackupon
themodule.
**Note:Because amaximumof only twokey fobs canbeprogrammed for eachmodule, it is
advisable to re-program anyexistingkey fobduring this programmingprocedure.
