110 VOLT TRANSFER
SWITCH INSTALATION
November 6, 2017
Page
1
of
7
BC Ambulance Service, Fleet Operations
1 877 652-7465
Block C, 2261 Keating X Road
Fax: 250 952-0275
AMBULANCE TYPE:
CRESTLINE DUAL STRETCHER
UNITS AFFECTED:
ALL CRESTLINE DUAL STRETCHER UNITS EQUIPPED WITH
THE STRYKER POWERPRO STRETCHER
ISSUE:
To provide 110V power to the internal receptacles of the ambulance
from shoreline power or the Go Power inverter, to facilitate charging of
the Stryker PowerPro Stretcher battery.
ACTION:
INSTALLATION OF AN 110 VOLT TRANSFER SWITCH
LABOUR TIME:
1.5 hrs
LABOUR CODE:
GMOTS
SERVICE PROCEDURE:
Read these instructions entirely before starting the modification.
Contact BCAS Fleet Operations if there are any questions or concerns.
1-877-652-7465
Check contents of kit provided.
2 Marrets - 110V connectors
1 female 110V plug
4 #10 x 5/8 self-tapping screws
2 cable clamps
3 Zap straps
1 Transfer Switch
BEFORE STARTING THIS MODIFICATION:
Confirm the 110 volt shoreline power is not connected to the ambulance, and
the vehicle engine is switched off.