14
Installation Procedures
Control Options
APush/Pull switch or aMultifunction (7DayTimer) are avail-
able.
7DayTimer
Themultifunction is capable of multiple start functions within
a 7 day period. Other functions include current time display
and AM automatic heater numeric fault code.Display refer
to instructions providedwith timer for setting options.
• Mount timer and bracket in a suitable location.
• Connect the switch harness to the connector at the
heater and run the harness to the control location.
• Cut harness to length at the control and install terminals.
• Connect switch harness to timer as shown below.
• Refer to timer instructions for other wiring options.
Option #1:
Dash lights to timer - connect wire between
dash lights circuit and timer at ter minal #1.
Option #2:
Operate heater continuously - connect
wire from ignition circuit to terminal #10.
See alsomultifunction (7 day) timer in
instructions.
Yellow
Red
Brown
Blue
DIAG
TRS
Yellow
Red
Blue
Brown
12 11 10 9 8 7 6 5 4 3 2 1
MO
1
2
3
18:00
P
a)
Power from battery “+”.
b)
Switch control to the heater.
c)
Power from battery “-”.
d)
Diagnostic from heater.
P
we
09:20
Multifunction
a)
b)
c)
d)
