Left rear grab handle installation_

Rear Entry Door Grab Handle Installation February 2019 page 1 of 2 AMBULANCE TYPE: Demers and Crestline UNITS AFFECTED: All In-Service Ambulances BC Ambulance Service, Fleet Operations 1 877 652-7465 Block C, 2261 Keating X Road Fax: 250 952-0275 ISSUE: The original yellow grab handle at the left rear entry door was removed as it could potentially interfere with the patient during loading while using the Stryker power load system. It has now been determined that a grab handle is necessary at the left rear door location for crew safety. ACTION: At the next scheduled “A” service, install the supplied Grab Handle at the left rear entrance door as per the following instructions. LABOUR TIME: 0.4 Hrs. Labour Code GMOGHI BILL TO: BC Ambulance . TOOLS REQUIRED: 1 power drill, 1/8” drill bit ,13/64” drill bit, hammer, centre punch, tape measure, marker pen, 7/16” socket and ratchet, 1/4 x 20 NC Tap. Supplied parts for installation 1 - Handle with 2 bolt hole covers 2 -¼ X1 inch coarse bolts 2 - ¼ inch lock washers 2 - ¼ inch flat washers